wtt
ok here is the deal I am selling my s10 drag truck project that is seriously about 95% complete I just do not have the time to devote to this thing anymore, it was originally a side thing but then my primary transportation was stolen and I had no choice but to try to finish it.That is not working out so I am willing to sell it for cash money or trade it for something relatively nice and reliable, or a street bike please let me know what you have and maybe we can wheel and deal.
the truck is an 85 short bed single cab and has never seen the street since all parts have been installed this is something that has been in the garage for a while.
chassis:
frame has been powder coated gun metal, red energy suspension cab and body mounts have been installed, new leaf springs, new hardware, bell tech rear sway bars, bell tech drop blocks to 6'' and fully adjustable with one and 2'' increments, 2003 chevy extreme posi trac rear end,the bed has been cut for a battery box, with battery power ran to the back,bell tech front sway bar installed in the front, the entire front end is brand new and has never seen grease, brand new global west upper and lower tubular control arms, edelbrock tie rods sleeves, new oem tie rods,bell tech 2'' drop spindles,belltech drop springs, cross drilled rotors, gm pads, new calibers, LMC stainless steel brake lines,aluminum radiator, custom radiator support,power brake conversion, plated fire wall,shaved doors was planning on bagging it later down the road.
fuel system :
16 gallon fuel cell mounted in the back, holley blue pump brand new just mounted, holley fuel pressure regulator, mr gasket glass fuel filter and bolt style clamps for fuel system.
motor and tranny
SBC 350 completly rebuilt from pan to distributer the motor has 0 miles on it it has a new bottom end crank,rods pistons,bearing, all oem spec,chrome timing chain cover, new double roller timing chain, all new gaskets top to bottom new freeze plugs, double hump heads, titanium springs and retainers, Holley 600 double pumper with new seats and gaskets,chevy boe tie intake,new water pump new alternator,new starter to fit the truck for the swap, chrome water neck housing,chrome morosso valve covers,new gasket and thermostat, plugs, wires, hei distributer,hedmann ceramic coated headers to accommodate the steering shaft. new neoprene oil pan gasket, chrome breathers.
th350 transmission recently rebuilt and ran for about 10k miles new huges, 3k stall converter.
interior
black leather power seats, black dash board with ac compat vents or non ac vents witch ever is preferred i have both sets, black door panels, autometer oil pressure gauge,autometer water temp gauge, custom alluminum dash piece for switch panel, b&m ratchet shifter,grant steering wheel.
****** the truck does need paint I put black fenders on it due to the old ones being beat up however the black ones are mint*******
I have a lot of extra parts for the truck and odds and ends that I cant remember right now but I im sure i have more stuff around
if this is something that you may be interested in feel free to call me or text me @ 407-873-5677 thanks
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 764x1023.
This image has been resized. Click this bar to view the full image. The original image is sized 764x1023.
This image has been resized. Click this bar to view the full image. The original image is sized 764x1023.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 764x1023.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 640x480.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 764x1023.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
This image has been resized. Click this bar to view the full image. The original image is sized 1023x764.
the truck is an 85 short bed single cab and has never seen the street since all parts have been installed this is something that has been in the garage for a while.
chassis:
frame has been powder coated gun metal, red energy suspension cab and body mounts have been installed, new leaf springs, new hardware, bell tech rear sway bars, bell tech drop blocks to 6'' and fully adjustable with one and 2'' increments, 2003 chevy extreme posi trac rear end,the bed has been cut for a battery box, with battery power ran to the back,bell tech front sway bar installed in the front, the entire front end is brand new and has never seen grease, brand new global west upper and lower tubular control arms, edelbrock tie rods sleeves, new oem tie rods,bell tech 2'' drop spindles,belltech drop springs, cross drilled rotors, gm pads, new calibers, LMC stainless steel brake lines,aluminum radiator, custom radiator support,power brake conversion, plated fire wall,shaved doors was planning on bagging it later down the road.
fuel system :
16 gallon fuel cell mounted in the back, holley blue pump brand new just mounted, holley fuel pressure regulator, mr gasket glass fuel filter and bolt style clamps for fuel system.
motor and tranny
SBC 350 completly rebuilt from pan to distributer the motor has 0 miles on it it has a new bottom end crank,rods pistons,bearing, all oem spec,chrome timing chain cover, new double roller timing chain, all new gaskets top to bottom new freeze plugs, double hump heads, titanium springs and retainers, Holley 600 double pumper with new seats and gaskets,chevy boe tie intake,new water pump new alternator,new starter to fit the truck for the swap, chrome water neck housing,chrome morosso valve covers,new gasket and thermostat, plugs, wires, hei distributer,hedmann ceramic coated headers to accommodate the steering shaft. new neoprene oil pan gasket, chrome breathers.
th350 transmission recently rebuilt and ran for about 10k miles new huges, 3k stall converter.
interior
black leather power seats, black dash board with ac compat vents or non ac vents witch ever is preferred i have both sets, black door panels, autometer oil pressure gauge,autometer water temp gauge, custom alluminum dash piece for switch panel, b&m ratchet shifter,grant steering wheel.
****** the truck does need paint I put black fenders on it due to the old ones being beat up however the black ones are mint*******
I have a lot of extra parts for the truck and odds and ends that I cant remember right now but I im sure i have more stuff around
if this is something that you may be interested in feel free to call me or text me @ 407-873-5677 thanks






















