i decided time to get a new car, need to sell anything i can so i can avoid financing. the bike itself is a clean as they get for its age. it is a 1991 honda cr 125, i rebuilt the top end and something went wrong after my 3rd day of riding leaving the top end (jug) badly scored. i am in the process of rebuilding it but jst never finished and will sell everything i have asking 900 obo for everything.
****yes you can get newer or/and running one for a cople hundred more but reguardless all dirtbike 2 stroke motors need overhauling after a while. you will not get anywhere near the amount of parts im including! and pay the price of all of this just to rebuild your original motor. if you know how to fix them your self this is probally the best deal you can find!!

*included it the registered bike with clean title in hand, verry good tires/brakes, minimal paint missing, good plastics EVERYTHING is on it! all it needs is the motor installed, all bolts are in place and all you have to do is take out 4 nuts that holt the motor mount bolta and slide a motor back in. renthal handle bars. good suspension/sprockets (bike is perfect besides motor)
*the stock 1991 bottom and is fine and all intact. transmissio/clutch is perfect(just needs piston/ring, and cylinder/head)
*i also have a complete 89 cr125 motor that i have no clue if it runs or not but was going to build this one along with my stock one to have as a spare.
*good spare barnett clutch
*1 carb
*2 good spare cranks
*5 jugs(top end), one is crosshatched(renently honed) and ported/verry clean from a race shifter cart, one is the stock off the 89, and one the scored but can be bored out (the stock 91 that i took off), and 2 are for whatever. these sell easily for 100 each on ebay with scoreing, the nice one is easily worth $200 alone so thats $600 right there)
*2 heads (also a new plug in box)
*2001 bottom end case with new bearings installed(was going to swap internals from stock 91 motor because it is silver and not black like the 91 case)
*3 pistons, 2 look good one is the weisco that went bad
* 1 full rebuild gasket kit (new just bought) with a few extra gaskets alll new.
*1 clymer book
*transmission gears from the 01 bottom end.
*pro circut pipe
*pro circut stand

all these parts are enough to build 2 complete motors plus a bottom end almost 3 motors. i dont have time/resources to do it and as mentioned im trying to buy a new car. i was told i can use the parts i have and build a running motor that would last a few months but i wanted to do it right and was planning on ordering new pistons/rings and just never got to. search anywhere and try to tell me tha parts arent worth it? even parted out i can make more just selling on ebay but its far easier to sell all together as a whole.

picture what it looks like but now the motor is on my work bench.