Audio HQ Car audio, regular music, anything audio should goes in this forum.

Interior ?s

Thread Tools
 
Old Aug 12, 2009 | 06:36 PM
  #1 (permalink)  
sireal's Avatar
Thread Starter
Shooting For 14's
 
Joined: Jul 2002
Posts: 803
Likes: 0
Question Interior ?s

Do any of you guys know of a GOOD interior shop? I just bought an old chevy truck. Its pretty nice except the interior needs to be completely redone. I m wanting custom work not just stock pieces. Any help would be great...Thanks in advance
__________________
............................
^^^^^If you want what you pay for from a trustworthy shop Go to ^^^^^^
Reply
Old Aug 12, 2009 | 06:56 PM
  #2 (permalink)  
kpr10is's Avatar
Maximaniac
 
Joined: Aug 2003
Posts: 1,551
Likes: 0
Default

Where are you located? And I'm assuming you have a second vehicle?...because custom interiors take a good bit of time.

We have a 13-year upholstery veteran at MCOR Automotive in Land O Lakes, who is extremely knowledgeable and talented. Swing by with the truck sometime M-F 9-5 for him to take a look at it.


After reading the above, it kind of sounds like a shameless plug, but it wasn't meant to be at all. Our upholstery guy just happens to be very good so it sounds like it.

Last edited by kpr10is; Aug 12, 2009 at 06:59 PM.
Reply
Old Aug 12, 2009 | 08:09 PM
  #3 (permalink)  
sireal's Avatar
Thread Starter
Shooting For 14's
 
Joined: Jul 2002
Posts: 803
Likes: 0
Default

Originally Posted by kpr10is
Where are you located? And I'm assuming you have a second vehicle?...because custom interiors take a good bit of time.

We have a 13-year upholstery veteran at MCOR Automotive in Land O Lakes, who is extremely knowledgeable and talented. Swing by with the truck sometime M-F 9-5 for him to take a look at it.


After reading the above, it kind of sounds like a shameless plug, but it wasn't meant to be at all. Our upholstery guy just happens to be very good so it sounds like it.
I live in Zephyrhills, and I do not have another vehicle at the moment but could line something up. I will try to come by tomorrow to see what u think.
__________________
............................
^^^^^If you want what you pay for from a trustworthy shop Go to ^^^^^^
Reply
Old Aug 12, 2009 | 08:12 PM
  #4 (permalink)  
Kyleisme's Avatar
Registered User
 
Joined: Dec 2007
Posts: 1,067
Likes: 0
Default

Originally Posted by sireal
I live in Zephyrhills, and I do not have another vehicle at the moment but could line something up. I will try to come by tomorrow to see what u think.
I am thinking you could drop pieces off at a time once everything was determined..
Reply
Old Aug 14, 2009 | 05:31 PM
  #5 (permalink)  
sireal's Avatar
Thread Starter
Shooting For 14's
 
Joined: Jul 2002
Posts: 803
Likes: 0
Default

Originally Posted by Kyleisme
I am thinking you could drop pieces off at a time once everything was determined..
I have not mde it out there yet, but most of my work will have to be done in the truck I think.... except the seat anyway
__________________
............................
^^^^^If you want what you pay for from a trustworthy shop Go to ^^^^^^
Reply
Old Aug 14, 2009 | 06:01 PM
  #6 (permalink)  
MCOR's Avatar
Registered User
 
Joined: May 2007
Posts: 1,013
Likes: 0
Default

Mine is a shameless plug. The whole reason I finally went out and found that 13 year veteran upholstery guy is because the local workmanship in that industry for the most part sucks. We were personally tired of subletting out the work for all the years and it taking forever to get back, ridiculous pricing, and crappy (or at best-mediocre) workmanship. It took MONTHS of looking before we were fortunate enough to come across our current upholsterer. This guy has absolutely brought our shop to a whole new level and in just a few short months has created a following that keeps him slammed full time. You really do need to check out some of his work here on TR under our shop forum and on our temporary myspace page. We are building a portfolio that is putting any other legitimate Tampa Bay area shop to shame. When you come by for a consult, you will FULLY understand why we say what we have here...
__________________
Matt-check out these deals: https://www.tamparacing.com/forums/m...ood-stuff.html

MCOR Automotive LLC
mcorautomotivellc@verizon.net
www.mcorautomotive.com
1635 Dale Mabry Hwy Ste 3
Lutz, FL 33548


(813) 362-5454

"TR Official 12V Shop"- Automotive Audio/Video/Security (JL Audio, Alpine, Hertz/Audiosn, ARC Audio), Window/Tail Lamp Tint, Custom Wheels, Clear Shield, automotive upholstery and leather conversions, "All the Above!"
Reply
Old Aug 14, 2009 | 06:32 PM
  #7 (permalink)  
sireal's Avatar
Thread Starter
Shooting For 14's
 
Joined: Jul 2002
Posts: 803
Likes: 0
Default

Just to give you an idea here is an inside and out pic, you can see why I want it done obviously...


__________________
............................
^^^^^If you want what you pay for from a trustworthy shop Go to ^^^^^^
Reply
Old Aug 14, 2009 | 06:35 PM
  #8 (permalink)  
kpr10is's Avatar
Maximaniac
 
Joined: Aug 2003
Posts: 1,551
Likes: 0
Default

That truck has some serious potential. Good find, once the interior is done it looks like it will be badass.
Reply
Old Aug 14, 2009 | 06:41 PM
  #9 (permalink)  
sireal's Avatar
Thread Starter
Shooting For 14's
 
Joined: Jul 2002
Posts: 803
Likes: 0
Default

Yeah its pretty nice for its age, It has a few things that need to be done but nothing that turned me off of it. I wanted a simple truck I could have fun with and this one runs great and I dont think I have had it out without getting compliments either
__________________
............................
^^^^^If you want what you pay for from a trustworthy shop Go to ^^^^^^
Reply
Old Aug 14, 2009 | 07:16 PM
  #10 (permalink)  
Kyleisme's Avatar
Registered User
 
Joined: Dec 2007
Posts: 1,067
Likes: 0
Default

you should stick with the them and do the white up top black down low.. do white stitching on the bottom and the black up top for a little offset..
Reply



All times are GMT -8. The time now is 03:32 AM.