everythins connected right... theres powwer there is ground and to the dc plaer and the rca's .... idk whats wrong?? can you run all the wires thru the same side or do the rcas have to be on separate side?

 

lets start with proper english.. what is DC plaer? and what exactly is the problem there is none listed..

 

my system doesnt work and its a cd player.. everything is connected fine and the wires are ran on the drivers side.. help!!

 

well you cant say everything is connect right since nothing is working right... Did everything work at at some point and quit working? Did you install it and it doesnt work? Info man

 

as long as you wires carrying the sound are shielded there should be no problem, if they are not you might get a hum.

if nothing is working then it sounds like you either A have a wiring problem or B have a bad unit somewhere, may it be your head unit or amp or C something random and wrong

if your 100% convinced it is not a wiring problem (answer A) then check all the fuses anyway just incase

now another set of questions

does nothing work (no sound/head unit doesn't turn on light up)
or
did you try to add an amp to power some extra speakers and those do not work?

 

Is your remote wire connected?

 

its probably the remote wire but it was working when i installed it then boom 3 days later nothing

 

check for popped fuses either in the power wire line or on the amp?...

 

i did and nothing im going to dedicate time to my car 2morrow morning then ill post the results

 

if you have at least a test light check power at the amp (both constant and remote) so you don't have to try to fish wires at 1st