Need specs on this amp
Guest
Posts: n/a
Need specs on this amp
50u|\|d57|234m C0|\|71|\|1um. 17'5 4 6 ch4|\||\|3l b|21gh7 ch|20m3 f4c3d 4mp. L1m173d p|20duc710|\|. 1 534|2ch3d 50u|\|d57|234m5 5173 4|\|d d1d |\|07 f1|\|d 4|\|y 1|\|f0 0|\| 17, 4|\|d 4|\| 3m41l 70 7h3 c0mp4|\|y 15 y37 u|\||237u|2|\|3d. 1f 4|\|y0|\|3 k|\|0\^/5 1'd 4pp|23c1473 17.
Just Ledoux it!
Joined: Sep 2000
Posts: 14,252
Likes: 0
heres what i found
Ok, anyway, the amp is a soundstream continuum. This was a quite limited production to celebrate soundstreams anniversary (forgot which one ..25th?). I think there were only 5-10 sent to my state. Anyway, it basically has everything you would ever need for an incredible system.
POWER: 75 X 4, and 300 X 1. Of course, that is VERY conservative because soundstream doesn't use voltage regulation, and these numbers are for 12V, and most cars run at more like 14V. Anyway, those numbers are RMS values, NOT PEAK. Those numbers are also for a 4ohm load. This amp is capable of a 1/infinity load impedance. I'm pretty sure thats what the manual says even. Basically as many speakers are you can stick in parallel, this amp won't quit on you.
CROSSOVER: This amp has the best active cross-over built in that I've ever used. complete control, 3-way, 18db/octave. This isn't your average lowpass and highpass, you have alot more control than usual, and the ability to do bandpass.
FINISH: The heat sink is polished aluminum. Looks great.. There are only a few polished soundstream amps, and they are all special editions or expensive as hell.
Ok, anyway, the amp is a soundstream continuum. This was a quite limited production to celebrate soundstreams anniversary (forgot which one ..25th?). I think there were only 5-10 sent to my state. Anyway, it basically has everything you would ever need for an incredible system.
POWER: 75 X 4, and 300 X 1. Of course, that is VERY conservative because soundstream doesn't use voltage regulation, and these numbers are for 12V, and most cars run at more like 14V. Anyway, those numbers are RMS values, NOT PEAK. Those numbers are also for a 4ohm load. This amp is capable of a 1/infinity load impedance. I'm pretty sure thats what the manual says even. Basically as many speakers are you can stick in parallel, this amp won't quit on you.
CROSSOVER: This amp has the best active cross-over built in that I've ever used. complete control, 3-way, 18db/octave. This isn't your average lowpass and highpass, you have alot more control than usual, and the ability to do bandpass.
FINISH: The heat sink is polished aluminum. Looks great.. There are only a few polished soundstream amps, and they are all special editions or expensive as hell.
__________________
http://www.myspace.com/jdreade
http://www.myspace.com/jdreade
Just Ledoux it!
Joined: Sep 2000
Posts: 14,252
Likes: 0
Originally posted by rangcrx
wow a four channel that can bridged mono wow thats new to me
wow a four channel that can bridged mono wow thats new to me
and what? yorue getting rid of the MTX?
__________________
http://www.myspace.com/jdreade
http://www.myspace.com/jdreade
Last edited by 93ex; Aug 31, 2003 at 10:42 PM.
engine building &best
Joined: May 2003
Posts: 11,971
Likes: 0
not sure mite be keeping it but i need more to power those that amp will not do it unless i bridge it but but still thats not much power even from Mtx im thinking on going with the new KICKER SX1250.1 you ever heard one
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
