AP Tires

Pfadt Coilover for 2010+ Camaro

This setup features 1.5 inches of ride height flexibility, 20-clicks of damping adjustment and a long list of technical features which combine to give incredible road holding ability with unmatched ride quality. Both the front and rear shocks in the Pfadt 2010 Camaro Coilovers utilize a mono-tube, inverted design with a floating piston to separate the shock fluid from the pressurized nitrogen.

Call us at the shop for a price quote. We might have a great deal for you!!

AP Tires

Rear arms for 2010+ Camaro

Reduce Weight, friction and deflection, increase strength and durability!!

Here is some specs for the arms:

Increase strength by 106% while simultaneously reducing mass by 17%. The decrease in trailing arm mass allows the suspension to react more quickly to the changing road surface keeping the tire in contact with the road to increase traction. Through further analysis and testing we were able to achieve a 32% reduction deflection which helps decrease wheel hop and increase traction.

Included with this kit is the leading edge Trailing Arm Bushing Kit and Rear Tie Rod Bushing Kit. Utilizing lightweight 6061-T6 aluminum sleeves that are hard anodized to create incredible surface hardness and microscopic pores to hold our special grease. These sleeves are then Teflon coated to further reduce friction. This is then coupled with our graphite impregnated polyurethane bushing which uses deep grease grooves to hold and continuously re-lubricate the surfaces for long and quiet operation. The result is an ultra lightweight, ultra-low friction joint that is 42% lighter than the OE bushing and more durable then ever before. This kit includes the bushing for both the trailing arm and also the upright for a complete performance trailing arm upgrade.

AP Tires

2010+ Camaro rear Diff bushing

Pfadt Differential Bushings hold the differential in place by replacing the soft factory rubber bushings. The kit will help protect the differential and is an absolute must for handling the added power of a super charger or high horsepower motor.
Made in the USA our bushing and sleeve kit provides superior quality and durability. The sleeves are made from 6061 T6 aircraft aluminum and anodized orange.
An important upgrade for dialing-out wheel hop, this kit is a great addition to any performance Camaro. The installation is involved, but the results are well worth the effort.
This kit includes bushings designed for performance street use. While these bushings are much stiffer then the factory bushings they still allow enough vibration absorption that differential noise is kept to a minimum.