Work Equip 01 and Enkei 92 Wheels 14x7 0ET Brand New Tires OMG!!!
WORKS ARE GONE WORKS ARE GONE WILL MAKE NEW UPDATED THREAD FOR 5 ENKEI 92's W/TIRES
Work Equip 01
Size: 14x7
ET: 0
PCD: 4x114.3
3 Piece Welded(Yea you can't rebuild them but they dont really need it and you'll never have a problem sealing them,yay)
Tires: Falken 512's brand new unmounted
Story and Condition: I bought all wheels as a set as a project. The works were in good physical condition, just needed polished big time and cleaned up a lot which is what I focused on. No real damage such as bends and major curbage, typical used old school jdm wheel condition, lips and inner barrel edges in very decent condition, just nicks here and there no big deal. One of the two's outer barrel/lips on the step lip has "acne scars"(Best way I could describe it) you can tell in the pics which one, it's not terrible, I tried the best I could to sand it out but its there. I have all hardware including valve stems for the works.




Enkei 92's (The old skewls
)
Size: 14x7
ET: 0
PCD: 4x114.3
Tires: Falken 512's mounted brand new never used
Story and Condition: These had lots of physical damage when I got them. I stripped them and went to work on the lips hammering them and grinding them down to be as asthetically and physically as well as possible(Inner barrel lips/edges were fine). They held air and still do, it's just i wanted to perfect them as much as possible. The hard work is done just the finishing repairs need done if wanted to make them show quality, i'd run them as is. Most of the focus was the above so if the polishing of the works wants to be achieved a tad more wetsanding and polishing is needed but once again i'd run em as is no prob.


Group Shots



Will not separate unless two buyers at same time come buy.
Think your buddy's rotas/xxrs/drags are cleaner.....Awesome go be a "baller", someone WILL appreciate these.
Price: $800 obo............OBO meaning if you truly are interested in them contact me and lets nego why you feel they're worth the obo and we'll make a deal. I just dont want to get a bunch of "Whats the lowest you'd take" bs.
THANKS!!!
Work Equip 01
Size: 14x7
ET: 0
PCD: 4x114.3
3 Piece Welded(Yea you can't rebuild them but they dont really need it and you'll never have a problem sealing them,yay)
Tires: Falken 512's brand new unmounted
Story and Condition: I bought all wheels as a set as a project. The works were in good physical condition, just needed polished big time and cleaned up a lot which is what I focused on. No real damage such as bends and major curbage, typical used old school jdm wheel condition, lips and inner barrel edges in very decent condition, just nicks here and there no big deal. One of the two's outer barrel/lips on the step lip has "acne scars"(Best way I could describe it) you can tell in the pics which one, it's not terrible, I tried the best I could to sand it out but its there. I have all hardware including valve stems for the works.




Enkei 92's (The old skewls
)Size: 14x7
ET: 0
PCD: 4x114.3
Tires: Falken 512's mounted brand new never used
Story and Condition: These had lots of physical damage when I got them. I stripped them and went to work on the lips hammering them and grinding them down to be as asthetically and physically as well as possible(Inner barrel lips/edges were fine). They held air and still do, it's just i wanted to perfect them as much as possible. The hard work is done just the finishing repairs need done if wanted to make them show quality, i'd run them as is. Most of the focus was the above so if the polishing of the works wants to be achieved a tad more wetsanding and polishing is needed but once again i'd run em as is no prob.


Group Shots



Will not separate unless two buyers at same time come buy.
Think your buddy's rotas/xxrs/drags are cleaner.....Awesome go be a "baller", someone WILL appreciate these.
Price: $800 obo............OBO meaning if you truly are interested in them contact me and lets nego why you feel they're worth the obo and we'll make a deal. I just dont want to get a bunch of "Whats the lowest you'd take" bs.
THANKS!!!
__________________
-Julien
-Julien
Last edited by Ashy-Larry; Nov 1, 2013 at 04:41 AM.
Yes $800 obo for both pairs. 2 Enkeis 2 Works, thats all i have.
I understand it sucks there's not a whole set but they are all the same size and make a dope complete set.
Brand new tires!!! Those alone are $270-$300.......I see Rotas,xxrs,and oem wheels w/brand new tires in the same condition or worse going for the same price or more. Given the fact of how rare it is to find Equip 01's in these sizes I think the price is fair.
I understand it sucks there's not a whole set but they are all the same size and make a dope complete set.
Brand new tires!!! Those alone are $270-$300.......I see Rotas,xxrs,and oem wheels w/brand new tires in the same condition or worse going for the same price or more. Given the fact of how rare it is to find Equip 01's in these sizes I think the price is fair.
__________________
-Julien
-Julien
Sweet wheels good price
__________________
01' HONDA CBR929RR for sale!!!!!
91' 240sx hatch KA24DE for sale after paint is finished!!!!!
89' 240sx coupe RB25 project car,
93' 240sx coupe RACE CAR,
90' 240sx hatch parts car,
93' Isuzu 4x4 work truck.
01' HONDA CBR929RR for sale!!!!!
91' 240sx hatch KA24DE for sale after paint is finished!!!!!
89' 240sx coupe RB25 project car,
93' 240sx coupe RACE CAR,
90' 240sx hatch parts car,
93' Isuzu 4x4 work truck.



