10.5 cr turbo setup

[JOE P.R.C]

I was wondering I have the setup I mentioned before, w/ 10.5.1 cr forged pistons, and eagle rods. What kind of turbo setup should I be looking for I already talk to John about the Hondata but turbo wise is it cheaper to by a complete kit or seperate parts.
And what do I need, turbo,Ic,mani,piping,wg,bov,injectors or fmu if so what kind or size,and turbo timer any ideal will be welcome.Also I want to keep my A/C and powersteering.

thanks,
joe

[Alpha]

If you look around for all of your parts it's usually cheaper and you are satisfied with all of your parts in the kit. You will need ...

* Turbocharger
* Wastegate
* Blowoff valve
* Intercooler
* Intercooler pipes
* Oil feed and return lines
* Exhaust manifold
* Misc flanges

Hondata is the key to your setup with that compression.

[John]

p|20p3|2 3|\|g1|\|3 m4|\|4g3m3|\|7 15 k3y 0|\| 4|\|Y 4f73|2m4|2k37 F1 537up

[2TurboImports]

don't forget a new fuel pump. Fuel and engine management are the keys to avoiding some reallllly bad outcomes.