wtb 350 block

[Suicidal Racing]

looking for just a 350 2 bolt main block.i would also like for it to be a 010 block or a 010 020 block these are on the front of the block under the timing chain.cant be over 30.if its a 30 the bore must be clean.seeing how this is going to be used to make around 900hp.

[fastpony89]

pm'd you

[Suicidal Racing]

that block wont work i need something from like 68-74 when they used better metals in the blocks

[-campy-]

bro you want a 2 bolt main to make 900hp thats insain

[Suicidal Racing]

if u get a 2 bolt main block and turn it into a splayed 4 bolt main with billet caps and fill it up to the freeze plugs and put good fasteners in it and use a balanced rotating assembly they will take 900hp.ask engine builded they will tell u the same thing

[cochese]

if u get a 2 bolt main block and turn it into a splayed 4 bolt main with billet caps and fill it up to the freeze plugs and put good fasteners in it and use a balanced rotating assembly they will take 900hp.ask engine builded they will tell u the same thing
How much power can you get out of a 4 bolt block with good fasteners,and a balenced rotating assembly?

[Suicidal Racing]

they say dont try and puch them past 750hp ...i'm going to be using all light wieght parts for mine..but i might just get a bowtie block because i know i will want to put a 200 shot and then like a 300 shot on it down the road.

[racingrick]

and actually they had nickel block 350's in some of the cars around 78 or 79, they are 4 bolt main block however..............sprayed a lot of nitrous through those blocks in the days, couldn't hurt them