probably going to mini trucker hell for this....
so yea im piss broke right now. all i need is fittings and a LINK set up to bag the truck...so...
2 link time. im hoping some of the guys that have been around the block will chime in and help me out. i plan on moving the leaf hanger up as far as possible or moving the bars to the inside of the frame so i can run bars about 33 inches long to minimize the wheel arc. im going to center the wheels when the truck is layed out so when its lifted they push back and dont jam the drive shaft into the tranny. any HELp would be appreciated. if your just going to tell me im stupid, PM it to me. kris |
i dont really think theres anything wrong with 2 links,ive seen plenty work for many years..i would personaly move the bars inside the frame..but thats just me
|
yea the bars are going inside the frame, thats how im getting the long bar lengths. from everything i have found the average length is like 29 inches so im hoping the 4-5 extra inches will cut down the arc alot.
|
What I would do is a mono leaf and bag over axel... I would do this for a while its cheap and will provide good ride quality trust me thats wut I did on my truck til I could afford a 3 link... btw Kris do u still have that grill?
|
no i dont sorry man. i swlold the headlights a grill to a kid in canada. ill well you the 2 firstones i have for a good price...fittings and line. PM me if youre interested
|
bro Im bagged already lol.... But how much do u want anyways?
|
50 bucks
|
are they new and what brand?
|
used, came off a buddys truck firestone 2500 or 2600 cant remember pretty sure 2600.
|
some of the best 2links....imo
https://i229.photobucket.com/albums/...79b34abcb8.jpg https://i229.photobucket.com/albums/...ac70dfaaa1.jpg :lol: |
lmao...someones been in the "most hacked thread" rest assured though everyone..the SD 4 link just came in today lol.
|
Originally Posted by Boats N' Hoes
(Post 6233649)
SD 4 link just came in today lol.
|
SD makes the best ish for S dimes no doubt. Done dozens of them. Need anything else give me a shout.
|
yea i called for a quote on fittings thursday....just waiting to hear back.
|
Originally Posted by Boats N' Hoes
(Post 6255293)
yea i called for a quote on fittings thursday....just waiting to hear back.
|
my uncle has an account with them also, but hes out of town so hell get me the price from them on tuesday. im poor so im just looking for the least expensive place. i also priced them out through airridefittings.com.
|
so are you keeping it paul or baggin it?
|
Originally Posted by Boats N' Hoes
(Post 6256729)
so are you keeping it paul or baggin it?
|
lol youre confused
|
so any new info on your build?
|
Originally Posted by ahernan3
(Post 6188332)
What I would do is a mono leaf and bag over axel... I would do this for a while its cheap and will provide good ride quality trust me thats wut I did on my truck til I could afford a 3 link... btw Kris do u still have that grill?
no... I would run a 2 link over a monoleaf anyday. I have had 2 trucks with bags over monos, one with a 4 link, and the current with a 2 link. of course the 4 link was by far the best, but the 2 link is way better in ride quality and stability than the monos. from the description of your plans you seem to understand the flaws in most 2 links, and sounds like what you have planned should work fine. the 2 link on my bodydrop was setup wrong by the previous owner. the front link mounts are too low and the pinion angle is only right when the truck is all the way up, so when I ride low you hear the u-joint binding up |
All times are GMT -8. The time now is 08:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands