Wtb Mk4 Parts
Thread Starter
Registered User
Joined: Sep 2006
Posts: 296
Likes: 0
Wtb Mk4 Parts
hey guys blew my 7mgte so im goin 2jz-NA-T anywho i need some parts i need a tt head gasket, tt pistons, tt injectors and a NA-T manifold for the turbo. also i need new or used AEM UEGO. please need the supra up and running again
Rocket Scientist
Joined: Apr 2003
Posts: 632
Likes: 0
Rather than swapping pistons just get a thicker, 2.5mm, headgasket. It'll lower your compression ratio plenty and save all the hassle of tearing the block apart. Don't use TT injectors unless you have the resistor pack for them. You can get 550cc RX7 high impedance injectors that will drop in without any modifications. Just some recommendations from someone who's been there.
__________________
'96 Supra NA-T
"I'm not driving fast, I'm flying low..."
'96 Supra NA-T
"I'm not driving fast, I'm flying low..."
No Rice Here
Joined: May 2009
Posts: 278
Likes: 0
You do realize your car will be down for about 3-4 months regardless, possibly more. There is a lot of custom work that is needed, and be prepared to spend around 10k. Also from what I read you want to do a 2jz N/A swap, then turbo it? why?
Thread Starter
Registered User
Joined: Sep 2006
Posts: 296
Likes: 0
Because it cheap and well I have someone who will do the swap for 1200 so I'm good and were can I get the 2.5 head gasket from and how much also were do I get the rx7 550s at and thanks for the info
Rocket Scientist
Joined: Apr 2003
Posts: 632
Likes: 0
RX-7 Injectors FS over on Supraforums. Boostlogic.com has the headgasket and any other related NA-T parts you may need.
__________________
'96 Supra NA-T
"I'm not driving fast, I'm flying low..."
'96 Supra NA-T
"I'm not driving fast, I'm flying low..."
Last edited by kbprice; Jun 23, 2009 at 01:54 AM.
