fkcu
Thread Starter
DudeMan
Joined: Sep 2006
Posts: 5,508
Likes: 0
fkcu
heat and how it makes bolts tighter
Thread Starter
DudeMan
Joined: Sep 2006
Posts: 5,508
Likes: 0
this is anger cause the tranny is tangling i thought i had clearance from the dp but i dont so i have to remove the dumptube for the ewg and its bending the allen key cause its so tight
Race Photographer
Joined: Nov 2000
Posts: 42,904
Likes: 0
pb blaster
__________________
Floridaracing.org Tenative Schedulealso check out the Auto-x Event Schedule
"I am and what I do are not a taxable commodity for you to use and abuse" - Me
This is my fuck the government movement
Floridaracing.org Tenative Schedulealso check out the Auto-x Event Schedule
"I am and what I do are not a taxable commodity for you to use and abuse" - Me
This is my fuck the government movement
Registered User
Joined: Jan 2007
Posts: 1,822
Likes: 0
do you have the tranny jack under the car!!!???
when i was taking mine off kyle, my tranny was hanging to. you should be okay. just dont let it hang to long.
also if you break the align bolts dont worry! they are 2 bolts that are on each side of the tranny. I just took mine off when i put the fucker back in!
when i was taking mine off kyle, my tranny was hanging to. you should be okay. just dont let it hang to long.
also if you break the align bolts dont worry! they are 2 bolts that are on each side of the tranny. I just took mine off when i put the fucker back in!
Thread Starter
DudeMan
Joined: Sep 2006
Posts: 5,508
Likes: 0
i have a jack holding it up im gonna spray the fuck out of the bolts tonight then work on it again tomorrow
TR Shop Mod
Joined: Aug 2003
Posts: 1,404
Likes: 0
The whole TBE needs to come out and keep a jack under the oil pan (with a piece of wood) and your tranny.
