Bracket to hold IWG shut on Turbo?
Does anyone know of a good solution to bracket an the wastegate arm on an IHI turbo to hold the wastegate shut?
I'm looking at a bracket from area1320.com but wanted to know if there were any alternatives. |
lol im looking for the samething.
|
if you have a dremel and/or cutting wheel and a drill with bits for metal you could probably make one yourself, shouldnt be too hard. but other then that, youd just have to get one made at a machine shop somewhere. I wouldnt spend more then $30 for one, just make some measurements and draw up a diagram and take it somewhere.
|
I may just do the DIY (dremmel it yourself) route
|
how much was your external kit? after seeing it thats all i want now
|
Originally Posted by SRQWRX
(Post 3658002)
how much was your external kit? after seeing it thats all i want now
|
Well, I got a another sponsorship (somebody stop me!) with Area1320 Subaru & DSM Turbo Fabrication! Shipped Daily! they make a bracket for the IHI turbos. I will be writing a review and posting pics when I get it hopefuly friday.
P.S. Aquamist kit has shipped! |
Originally Posted by KAX
(Post 3661715)
he got his for much cheaper then you will find it. Someone did it themselves and then decided not to use it. a UR kit with wastegate is $550 or thereabouts. not sure what the slowboy is, but im sure its right around there.
|
I'd go with that setup, mine was just a bit more but it was also ceramic coated
|
Originally Posted by xxBoost Junkiexx
(Post 3661736)
Helix just came out with their setup and it's only 400 shipped from gruppe-s! Comes with a Tial 38mm or 44mm EWG.
|
All times are GMT -8. The time now is 11:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands