i got a modified starion front mount intercooler, the original inlet/outlets have been cut off and a piece of aluminum was tig to close off. there are 2.5 inlet/outlets located on the endtanks (straight no bend). the intercooler has been pressure testec and cleaned internally. all welds are done professionally no nasty welds on this piece make offers

http://www.homemadeturbo.com/turbo_projects/14b/ the intercooler at this link is what mine looks like however this it but it is setup extactly like this

 

ttt no pics at the moment, intercooler resembles those found on the evolution except the pipes are going straight not bent downward at a 45degree liket the evo....
TTT

 

the intercooler core is 17 x 8 x 2.75 (not including endtanks)

 

ttt

 

hey im super interested in the fmic. i REALLY need one. where are you located? If you are in tampa, id have to see pix or meet you somewhere to take a look at it. actually id love to see pix anyways if you can get em. PM me please

 

i dotn got a digital camera, if you go onto homemadeturbo.com and look at the turbo projects you will see a few good examples of what it resembles lmk

 

yah i know what its gonna look like bassically....im looking more to see the condition of the fins and quality of the welds on YOUR unit....id love to b uy it but like i said, im not gonna drive to tampa just to check somethin out. LMK if you wanna meet up

 

sorry no pics, some fins are bent but i can straighten them with needle nose pliers with no problem, no bent tubes, and the welds on this intercooler would probally be teh best welds you ever seen GUARANTEED, sale pending