CBR parting out F2/F3/F4
https://www.tamparacing.com/forums/s...ghlight=cbr+f3
All the info on the whole bike, finally decided to part it out.
F4 forks and brakes including calipers new rotors and pads - $250
F3 headlight with xenon bulb & upper fairing attached - $120
1997 Gauge Cluster with bracket - $50
Tank fits 1991 to 1997 to my knowledge, perfect condition, sanded ready for paint - $125
Center tail Fairing - $30
Left and right upper fairings (damaged a little but doesn't look bad - see pix) - make offer
Left and Right lower fairings - $60 each
Left and right rear tail fairings - $60 each (slight damage to right side near taillight)
Front brake lever and master cylinder 97 F3 - $50
Front 17" rim (1997 F3) with dunlop 208 (400 miles on it)
Rear 17" rim 97 f3, with worn dunlop 208 (about 500 miles left on it.) - $100
with sproket, axle and spacers, rear brake hub and disk w caliper - $175
one piece, two person seat Perfect condition - $35
starter with starter switch - $35
Engine with new tensioner (needs installation) and 20,xxx miles on it, new head gasket, and valve cover gasket - $330
Other parts are available like the suspension and bars etc...just pm me or call me for the rest of it. ALL PRICES ARE NEGOTIABLE IF I WANT
.
the names jordan the number is below. Happy buying. Pix will be posted in a minute...
All the info on the whole bike, finally decided to part it out.
F4 forks and brakes including calipers new rotors and pads - $250
F3 headlight with xenon bulb & upper fairing attached - $120
1997 Gauge Cluster with bracket - $50
Tank fits 1991 to 1997 to my knowledge, perfect condition, sanded ready for paint - $125
Center tail Fairing - $30
Left and right upper fairings (damaged a little but doesn't look bad - see pix) - make offer
Left and Right lower fairings - $60 each
Left and right rear tail fairings - $60 each (slight damage to right side near taillight)
Front brake lever and master cylinder 97 F3 - $50
Front 17" rim (1997 F3) with dunlop 208 (400 miles on it)
Rear 17" rim 97 f3, with worn dunlop 208 (about 500 miles left on it.) - $100
with sproket, axle and spacers, rear brake hub and disk w caliper - $175
one piece, two person seat Perfect condition - $35
starter with starter switch - $35
Engine with new tensioner (needs installation) and 20,xxx miles on it, new head gasket, and valve cover gasket - $330
Other parts are available like the suspension and bars etc...just pm me or call me for the rest of it. ALL PRICES ARE NEGOTIABLE IF I WANT
. the names jordan the number is below. Happy buying. Pix will be posted in a minute...
__________________
NOBAMA!
NOBAMA!
how much for the 17" front rim...
__________________
Why is it when ever I really need to weld something the acetylene always seems to run out...
Only babies drink from bottles...
Boosted 00 Si
N/A 93 HB b16/18
Why is it when ever I really need to weld something the acetylene always seems to run out...
Only babies drink from bottles...
Boosted 00 Si
N/A 93 HB b16/18


