IndyCar acting to minimize 'pullback' brake accidents at Indy 500
"Ain't nobody gonna cheat! They all be honest as the day is long!"
Motorsport Images
2.6k shares
share
tweet
emailBy
Marshall Pruett | May 25, 2022 3:05 PM ET
After witnessing an embarrassing number of drivers fly past the 60mph pit lane speed marker in a dangerous manner and either crash or receive speeding violations at last year’s Indianapolis 500, the NTT IndyCar Series and brake vendor PFC are
hoping to avoid another spate of incidents caused by ‘pullback’ brake configurations.
Within the brake calipers made by PFC, teams have pairs of spring-loaded levers that can be used to pull the brake pads back from the brake disc and prevent drag — a loss of straightline speed – being created by the pads and discs making contact when the brakes aren’t in use.
More IndyCar!
Just as teams have the ability to adjust those levers to require light pressure from the driver’s foot on the brake pedal to push through the ‘pullback’ threshold, team can also tune the levers to require immense force to break through the threshold and get the pads to clamp against the discs. Once pressure is taken off the brake pedal, the levers pop back into place and move the pads away from the discs, and the cycle starts anew. There is NO RULE AGAINST IT! Smokey Yunick would love this....
Some teams took an aggressive approach to setting up the levers on their brakes at Indy last year, resulting in a rash of incidents at pit entry. Image by Marshall Pruett
As seen in the 2021 Indy 500, some multi-car teams went for an aggressive pullback approach which forced their drivers to pump the brake pedal in a frenzied panic to get the car to stop on entry to pit lane, and while IndyCar opted not to ban the levers for Sunday’s race, stricter enforcement of ‘normal’ settings for the levers as defined by PFC will be part of the
pre-race technical inspection process. PRE-RACE? PRE-Race? Are you people so stupid as to believe that once they pass the pre-race tech that NO ONE will change it back? Are you a bunch of Dumasses?
“There’s a reminder going out to teams from PFC about the process that they’re expected to follow,” IndyCar president Jay Frye told RACER. “You can’t say what was done last year was not within the rulebook, but we’re going to make sure processes defined by PFC are completely followed to a T. And there’s been nothing that would make us think that anyone will not following the process correctly.” BS BS BS
Some teams also opt to remove the levers altogether for the 500.....and then cross their fingers and say "Scouts Honor"
before changing it back....all cars which remove the levers will be found at the back of the field.
“But for sure, we’ll check in pre-race tech,” Frye said. “We think we’ve got a pretty good process to check them as they come through to make sure that there are in compliance.”.....and then he declined to answer if they would stop the levers from being put back.