Note the different part numbers on the HyperFlex bushings as well as the difference in height for both the bushings and sleeves. Follow the instructions so you don't get this wrong.
Follow the instructions and note the part numbers for each location. There are two bushings per hole, and they slide in from either side. If the shoulder doesn’t touch the control arm, or it feels like there is a gap between the bushings, you have them in the wrong place. Finally, we tapped the metal sleeves into the bushings — don’t leave these out!
Like we said, installing the Energy bushings is simple. Clean up the hole, push the bushings in, tap in the metal sleeve, and you're done!