Old May 21, 2018 | 08:03 PM
  #1 (permalink)  
senor honda's Avatar
senor honda
Registered
 
Joined: May 2005
Posts: 104,968
Likes: 21
Default AFCO Introduces Terminator Spindle Mount Adjustable Struts

AFCO Introduces Terminator Spindle Mount Adjustable Struts

By Chris McWilliams May 11, 2018New from AFCO – the Terminator Spindle Mount Adjustable Struts. These struts are the most advanced and most adjustable spindle mount strut available today. See more details below. Official Release:AFCO is proud to bring to market the most advanced and most adjustable spindle mount strut available today. Sporting a large 46mm monotube piston, the range of adjustment is un-matched to enhance tuning and performance. You will not find a more user friendly adjustable strut at any cost. Each adjustment is metered with a detent for precise adjustments. These struts are available in 3 lengths to fit virtually every ride height. A perfect choice for “No Prep” style of racing, the “extra travel” models promote additional weight transfer to hook on low traction surfaces. For more conventional applications, the new AFCO Terminator Series Struts are offered in common lengths to retro fit to existing chassis in the field or new builds that need to fit an existing jig.Double adjustable struts allow for nearly infinite chassis tuning combinations, but more importantly, the broad range of adjustment offered will allow tuners to find the sweet spot quickly and efficiently. Features:
  • 3 lengths are available to fit most tube chassis applications.
  • 100% Dyno tested for accuracy and quality.
  • Double Adjustable 46mm monotube design provides broad range of adjustment.
  • Fully independent compression and rebound adjustments for ultimate tuning and performance.
  • AFCO Exclusive aluminum steering arm gives better tire clearance. “Competitor style” steel steering arm allows you to upgrade to an AFCO strut without having to shorten tie rod assembly.
  • Pro style coil-over spring adjuster nut has positive clicks with each turn, locks in place with an allen wrench and has pronounced finger grips to aid setting ride height. Spanner wrench may also be used to set ride height.
  • 2 or 4 piston caliper brackets available.
  • ’67-’69 Camaro pin design for common wheel/brake kit fitment.
  • Best front end control on the market!

Article Sources

__________________
Here is the listings of ALL New Mexico Car Events Including Route 66 Anniversary
https://www.tamparacing.com/forums/t...ar-events.html
Top Car Club Meetings? Click a city
Got a video? Email it to
Bobfixesitup@yahoo.com
________________________________________________


Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html

Keystone picture gallery is here:
https://carstoshow.com/eventdetails.aspx?eventid=93202

Veterans and Friends
on First Saturday...Some pictures....
https://carstoshow.com/registerevent...eventid=102331

Port Richey Rod Run at Coast Buick GMC
https://carstoshow.com/registerevent.aspx?eventid=99114

50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...acing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
50's Diner pictures are here:
https://carstoshow.com/eventdetails.aspx?eventid=93194

All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html

Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/

























Reply