i noticed that this place seems not to get many replies so i may post this in pit road if i dont get anything butttttttt.
any shops around clearwater/tampa/st.pete area that do good custom fab work on radio bezels?
heres what i have and what i want to do:
this will be for a 2013 Tundra (double cab)
the radio bezel:
nexus 7:
nexus 7 dock:
and maybe a volume knob that will split into the RCA cables that will need to be fitted on the bezel. as well as possibly some PC fans that can go on the back of this (it will make more sense when i explain what i want fabricated)
-------------------
with that said this is what i want done:
with the bezel i would like to integrate the nexus 7 dock to the bottom of this bezel so the nexus 7 is able to "slide" into this bezel (i would love to be able to see the nexus that is displayed on the dock, but not really needed if its too much of a hassle). now since the nexus 7 is actually bigger than the hole on the bezel this bezel would need to be shaved just a bit on the sides so the camera is available while in the dock. on the bezel itself, more than likely at the top of the bezel i would like to some how make it so the nexus 7 slides into this bezel (like a railing on the side of it, but the railing doesnt need to go all the way down to the dock, just mainly at the top so it keeps it from flopping out) and the top of the nexus 7 can go a little above the bezel and this would be helpful as well to be able to reach the power button in case something happens. then on the actual bezel part itself i would like a hole drilled towards the bottom left of the bezel for a volume knob to be placed here (this volume knob will tie into the RCA cables so i can lower the volume from here).
now on the bezel it has an opening for where a regular radio would go in and this would have to be blocked off since there isnt any "brains" going that far in. so a backing would be needed and to keep the nexus 7 from overheating while on, i would ideally like 2 PC fans blowing from this backing onto the back of the nexus 7.
any input on this would be very muchly appreciated, i check TR often so any shops that read this and think this can be done please reply or PM me and we'll talk about pricing.