View Single Post
Old Nov 2, 2011 | 10:47 AM
  #3 (permalink)  
ek4dr's Avatar
ek4dr
Registered User
 
Joined: Jul 2011
Posts: 496
Likes: 0
Default

Originally Posted by j.r.hatch
Check inside the dizzy , faulty connections will cause this .
already checked all that put new rotor and cap checked all the connections i found the problem i was reading a forum that a 02 sensor will go bad and not throw a cel i disconnected it no more problem reconnected it and it started doing it again.
Reply