Originally Posted by
purple87lx
What cam could I run with stock pistons not having to fly cut? Canfeild heads with 2.02 valve with 1.6 rrs. I've read about maybe a b or e cam? Plus its gonna be a turbo car so I was thinking stock cam.
run what cam is best for your combo, borrow a valve notching tool. I have cut many stock pistons and never had a issue.
http://www.iskycams.com/pdfcatalog/2004-05/page17.pdf 40 dollars for rental or 140 for the tool.
I have ran a F cam on stock pistons with 2.02 but you need to check p/v clearance to make sure. also f cam is a better choice for turbo