today we teach you how to put SPLPARTS.COM ( www.splparts.com ) subframe collars / spacers on your rwd nissan multilink. in this case it's an S13, but many other nissan platforms work the same way.

tools needed:

1/2" drive gun
12mm deep socket
17mm deep socket
8" 1/2" drive extension

an extra set of hands in some cases


the first thing you're going to do is remove the 12mm bolts and nuts from each side holding the front crossmember mounting point brackets to the chassis.

once they are gone, remove the 17mm deeps from the front as well and the bushign bracket will come down.