ok. i found the problem. it was the small coolant hose that was leaking (between the EGR valve and the first fuel injector) there are TWO COOLANT HOSES in there, one big and one small thats right next to each other. i had that replaced today and put everything together, even putting new fan motor on my radiator fan and a new A/C fan.

so put everything together today and fired it up. no leaks so its all good.............till i turn on my A/C and only the A/C fan turns on and not the radiator fan (normally both fans turn on when A/C is turned on)

so i have been reading in hondatech and team-integra.net on the problem and people are saying that is could be the thermo-switch, temp sensor sender unit, fan switch or the relay....

problem is, i havent really seen exactly where they are all located. i have a b18a1 93 integra and i have been getting different answers from different forums..

there are two sensors underneath the dizzy (one big and one small). and then there is another sensor where the thermostat housing is. also, in the b18a1 engines, they said that there is a sensor too right beside the oil filter. i cant even see where my fan switch relay is too. been looking around and still no luck

can anyone help me out and point me to the right direction? thank you for your time. replies are greatly appreciated.