Thread: ATF ratio
View Single Post
Old Aug 17, 2011 | 04:46 PM
  #7 (permalink)  
Tampabaytunedinc's Avatar
Tampabaytunedinc
Registered User
 
Joined: Aug 2011
Posts: 131
Likes: 0
Default

Originally Posted by JayBurd3
It idles fine and runs great! Could it possibly be o2 sensor? It was tuned by previous owner. I going to get snowman to tune it I just wanted to see how bad the ratios were and under boost it is 12.3 not 12.6 typo
Might be the sensor, take it out anfd test it. Easy way is to spray bake clean on a rag and hold it over the sensor. It should go rich, 11 or lower. Or u could check the voltage of the oem oxygen sensor. That will tell u if u are,actually lean at idle.
Reply