Originally Posted by Tiffiny

e7 heads race valves(stock size) upgraded v/springs ...ready to go << These are Frankies old ported heads, went 10's with a turbo. They have the stock diameter Manley proflow valves, the valves alone are worth more then the heads. Have been cut for bigger spring seats so it has a good set of valve springs on it also. Port job is great on here, its a great deal.

1.7 crane bolt down rockers missing one bolt ....can use a stock one

2 new good felpro gaskets <<these are the good head gaskets, were about 70 a piece.

econo build should make some decent power...

was going to put on my car but going diff direction/come by the shop check them out

john 727 504 2673