Here are some important parameters:

Compare these against what you already have. If there is anything specific you are looking for, let me know.

The addresses are as seen by the EEC. To convert them to file offsets subtract 0x82000
0x8C046,FN036,maf_transfer_function
0x8C506,ALOSL,fuel_injector_low_slope
0x8C504,AHISL,fuel_injector_hi_slope
0x8C476,FUEL_BKPT,fuel_injector_breakpoint
0x8C554,FN367,injector_comp_batt_volt
0x8C47A,MINPW,fuel_injector_minimum_pulse_width
0x8CC51,LSFECT_SH,low_speed_fan_on_ect
0x8CC50,LSFECT_CL,low_speed_fan_off_ect
0x8CC4B,HSFECT2_SH,high_speed_fan_on_ect
0x8CC49,HSFECT_CL,high_speed_fan_off_ect
0x8D038,FN2200,borderline_knock_table
0x8C730,FN1360,base_fuel_table
0x8C6B8,FN303,WOT_fuel_multiplier
0x8C2D4,FN348A,crank_fuel_pulsewidth
0x8CD34,FN884,crank_ISC_duty_cycle
0x8C482,SARCHG,Engine_displacement
0x8CC06,DRBASE,idle_speed_drive
0x8CC04,NUBASE,idle_speed_neutral

Brian
EFI-Unlimited