KA24DE Parts

Fresh ka block with all machine work done (still stock bore) Honed and decked-$200
Crank was checked and is perfect, never a rod knock or anything-$150
Comes with brand new Clevite Rod and Main bearings oem size-$60 for each or $100 both
Fresh head from the machine shop, had a 3 angle valve job, new valve stem seals, bc springs and retainers and bc 264 Cams-SOLD
new ka-t tubular stainless manifold for T25/T28-$50
Tapped oil pan for turbo drain-$20
Steel braided oil feed line, all the an fittings, and oil drain line-$30
New full rebuild kit with all gaskets-$50

Holset HX35 Turbo, Good for up to 500hp easily, Twin Scroll, No shaft play, internal wastegate was blocked off, has the standard 5 bolt exhaust flange but comes with the v band adapter plate-SOLD

SR T25 with blown oil seals and has some shaftplay-$15

AEM FIC, New in box, Gives you timing adjustibility so it's way better than a standard piggy back-SOLD

Used no name front mount, 31x12x3, has the middle tab on top that you need to mount on 240's-SOLD

Used but working HKS SSQV BOV- SOLD

Prosport Smoked lens boost/vacuum gauge-$15

I also have one hatch that I am parting out. not much for suspension left and no motor or trans. All parts are obo

And I have one rolling Hatch shell that has a half cage, no motor or trans as well-SOLD

Also have s13 ac lines that the ends were cut and rewelded for sr. I'm including all the lines and the condenser-$100

Call or Text for more info or offers 352 206 1366