Coil (with wires connected, tested at coil terminals)
Blk/Yel to ground - 1.23v
Wht/Blue to ground - 1.23v

Coil with wires disconnected
11.88v between black/Yel and wht/grn

Resistance at the coil terminals with wires on and off the terminal reads 0.9 ohms


Igniter
Blk/Yel wire to ground 0.7v
Wht/Blu to ground 0.7v
Blue wire to ground 11.88v

I'm assuming that's the problem that the blk/yel and wht/Blu aren't at battery voltage? Where should I start checking to figure out why this is happening?