Old 04-23-2011, 11:36 AM
  #7 (permalink)  
Night Rod
Registered User
 
Night Rod's Avatar
 
Join Date: Mar 2011
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by GNs-r-slow
My kind of build...CARBED!!! Post some more info on the build!

It's a 4.6l with custom forged JE .005" over domed pistons with tops thermal coated & skirts teflon coated. Total Seal stainless gapless top rings, .275" thick top ring lands, custom cut Cosmetic head gaskets with 3.602" bore @ .027" thick. True CR is 12.55:1. Fox Lake cnc stage III port job and cc'd at 55cc, Manley stainless valves, Crower stage II cams, springs, titanium retainers. Manley forged H-beam rods, factory forged preped crank, all ARP studs & bolts thru out motor. Block blueprinted, torque plates used, rotating assembly balanced, Sullivan intake, Pro-form 650 dp, Wilson 1" cnc tappered 4 hole spacer, Zex perimeter nitrous plate. Melling steel oil pump/housing, ATI harmonic damper, MMR distributor drive modified by us, MSD crank trigger, MSD crank trigger modified distributor, MSD digital 7 programmable ignition with MSD-HVC II coil, 10.4 mm Taylor Thundervolt 50 plug wire. MMR deep sump oil pan, extended oil pick up, windage screen. Kooks step headers 1.625" primaries to 1.75" primaries and 3" collectors. I port matched the headers to the exhaust ports. Fire extinguisher system with dual nozzles located inside engine bay. One mounted on each shock tower. FAST dual bank A/F monitor, O2's are mounted at each collector. Glenn performance stainless deep sump fuel tank with Aeromotive big fuel pump, Russell anodized red 1/2" fuel line.

NX modified nitrous system with stand alone fuel system set up to handle 300+ shot. Will I go that high, No! Looking to build up to a 250 shot.

Trans is brand new and built by Liberty's gear TKO 500, 26 spline input shaft, mikronited, cryo-treated gears, face platted 2 thru 4th. Spec stage 2+ clutch, bullet proof bell housing, PST carbon fiber driveshaft.

Built 8.8 rear with Moser 31 spline axles, Moser spool, Moser 4.30 lightned/mikronited gears.

UPR tubular chromoly K-mmember/A-arms. Maximum Motorsports sub-frame connectors, caster camber 4 bolt plates, Aerospace drag rotor, calipers all 4 cornors with all stainless steel brake lines. Manual steering, manual brakes. 10pt chromoly cage/window net kit with swing out side bar.
__________________
03 Mach 1
Phil

Tampa Racing members get reduced price.
http://www.prbmachining-absdeletemanifolds.com/