I just finished replacing my track setup with my street setup.

If you remember my questions earlier about the grooving on the front rotors: Too much brake rotor grooving?

Craig, I took your suggestion on the HT-10's on the front. The HT10's really cleaned up the grooves from the last event, no noise, no chatter. Turns out they don't make HT10's for the rear so I kept the HPS's on the rear. The results at the track were the best I have encountered yet. The car ran cool the brakes never faded, I had no issues whatsoever slowing the car down. I love the HT10's.

Even though the back pads still look brand new and I hated changing the back pads out, I will look into getting something more closely matching the HT10's.

All that being said, I would like some input on the condition of the rotors and the pads.

First the rotors, A lot of spider like cracking going on. I have taken some pictures. My next track day will probably be a two day event at Sebring full circuit so will have to decide whether to change them out or not. Please take a look at let me know what you think, make sure you zoom in.

http://img861.imageshack.us/img861/9387/img2010i.jpg
http://img856.imageshack.us/img856/7295/img2012q.jpg
http://img690.imageshack.us/img690/5809/img2013el.jpg
http://img600.imageshack.us/img600/6714/img2014p.jpg
http://img199.imageshack.us/img199/6694/img2015m.jpg
http://img864.imageshack.us/img864/5350/img2017t.jpg

Also, the HT10's did not hardly wear at all, unfortunately a large chip had broken off one of them. I will try to get them warrantied with the place I bought them from.

http://img811.imageshack.us/img811/1415/img2019d.jpg
http://img34.imageshack.us/img34/7275/img2020p.jpg
http://img94.imageshack.us/img94/959/img2021a.jpg
http://img18.imageshack.us/img18/3254/img2022vf.jpg