Thread
:
gauging interest on 1uz swap from 93 ls400
View Single Post
Mar 22, 2011 | 03:21 PM
#
4
(
permalink
)
williamb82
grease monkey!
Joined:
Oct 2003
Posts:
3,718
Likes:
0
here are the pics. i was wrong about something. upon closer inspection, the piece the radiator support attaches to on the passenger side does not need replaced. it was the fender i saw that was bent, not the metal underneath. also, the drivers side fender is bent some near the firewall from the hood. never looked very close at it as when i look at it i get pissed at myself for not having full coverage. hope these pics are satisfactory. everything goes with the car except the stereo system. as you can see the front seats and consol cover look new. they were redone a lil over a year ago. also the tires have excellent tread on them. i only put about 10k miles on them and i have the receipt as i purchased road hazard and the free replacement certs etc... bottom of the radiator never moved btw. just the top. we used a ratchet strap hooked to the trailer to pull the radiator support back to get the radiator off the fan so the engine would start and run.
more pics here
Lexus pictures by williamb82hotmail - Photobucket
__________________
http://www.cardomain.com/ride/2042690/1
black 84 supra, 7mgte, truetrac, bbk, etc.. more in the works
http://www.cardomain.com/ride/2117186/1
blue 85 supra, beater
http://www.cardomain.com/ride/2965297/1
black 86. saved from the crusher! wicked setup on the way.
http://www.cardomain.com/ride/2235741/1
64 chevy c10, finally getting a new body. woot!
Reply
0
0
williamb82
View Public Profile
Find More Posts by williamb82