Old Mar 4, 2011 | 10:21 AM
  #1 (permalink)  
jmdoc66's Avatar
jmdoc66
Registered User
 
Joined: Mar 2006
Posts: 241
Likes: 0
Default 1984 convertible mustang rolling chassis $1500

Black/grey. Originally a 6 cylinder automatic with power locks and power windows.
Good body, not much rust on the undercarriage. Any rust can be wire brushed off easily.
Body is complete but unassembled. Top fabric needs to be replaced.
This is what comes on/with the car;
good ’84 Gt front bumper.
Granatelli tubular cross member with modular mounts and ¾ inch forward offset
Granatelli tubular lower front control arms with ¾ inch forward offset
Front coil over setup with 350lbs springs. Also included is a pair of 300lbs springs
1996 spindles and 5 lug hubs
4.6 mark VIII motor with a GT pan to fit the fox body. Motor is a long block and came out of a running car.
New poly motor mounts
Hydroboost set up.
T-45 transmission with cobra clutch.
’92 8.8 with stock gears. Not sure what the gears are.
5 lug axles
Aftermarket boxed upper and lower control arms.
Coil over conversion with 200lbs springs.
New 17 x 9 SSC chrome aftermarket rims with 265x40-17 tires. 75% tread left
New 17x10 ssc chrome aftermarket rims with new 275x35-17 tires.
The bad:
No front seats, otherwise interior is complete but in pieces
No wiring harness for the engine
No sway bars
No radiator
No battery
No front steel inner bumper
Driver’s door is dented, but a replacement door is included.
The car needs to be put together, and finished.

The reason I’m selling is because I lost interest and want my garage back.
$1500 obo.[ATTACH=CONFIG]149283[/ATTACH][ATTACH=CONFIG]149284[/ATTACH]

Thanks,
Mike
jmdoc66@hotmail.com
Reply