and why is that, I used the search button and didn't find nothing. I looked on other sites and found nothing useful. I have a TR account and no zilvia or 240sxforum account and didn't want to make an account to ask one of them guys. So show me what you found on our search button, closest thing I found on google was some honda forum saying this.... "If your cylinders are not scored you don't need to hone them. Just clean the cylinders with WD40 and scrape off the carbon at the very top of the cylinder and use a new set of Honda OE rings and your golden.

If you don't beleive me then you can refer to the Helms manual which also states what I just stated. I've seen this done a couple times and all times it has worked awesome.

This is what Omniman did with the 14 yr old B16A block in our 200whp B16 Project car."

and all I wanted to know is if someone on here has done it when replacing the pistons, the skirts of mine have some wear on it

But you know you're probably right since I'm a part of some new wave of idiots