Another H22 Prelude in for some Proven Power fabrication. His newly purchased traction bar didnt quite line up and needed to be modified due to the position of the turbo. We were also asked to upgrade his old dented 2.5" downpipe to a new 3" downpipe.

Some pics

The traction bar was cut and prepped by the customer



bracket needing to be rewelded



where we need to weld the bracket



now welded





We went to the bandsaw and shortened the bar the heim joints screw into and made spacers out of round stock.





Now time for the exhaust...

Downpipe before:



dent



after disassembly i started to tack some pieces together



welded in a small flexpipe for minimal movement





finished product with 2 bolt flange



now installed






We needed to build a small testpipe to tie the downpipe/exhaust together. The bung for the wideband oxygen sensor fit perfect in this location.





Ready for pickup !



Thanks for looking ! If you need quality welding/turbo fabrication contact

Proven Power LLC
8602 Temple Terrace Hwy C14
Temple Terrace FL 33637
813.988.DYNO(3966)
Home Page

2000 Honda Prelude 3" custom Proven Power downpipe