Uh ok Ill try. Looks like the two on the right side of the picture are for the starter. The red one is for the power. The one with the black plastic clip is for the solenoid. I think the other side of that wire just goes through the harness then comes out where you see it in the middle..right? So thats for the solenoid...That ground cable next to it is the starter ground. So ground it or dont worry about it. The left most red one is obviously the batt terminal...hook it up...and take those two 8ga white wires from the fusebox and run it to the positive terminal. As for that other wire coming out the left side, looks like that is the other side of the starter ground correct?