Thread: Building a DSM? Take a look!
View Single Post
Old 12-06-2010, 10:15 AM
  #9 (permalink)  
S&R performance
Registered User
 
S&R performance's Avatar
 
Join Date: Dec 2006
Posts: 887
Likes: 0
Received 0 Likes on 0 Posts
Default GSC Power Divison Cams


GSC's Power-Division is all about getting the most out of your car, these high-performance camshafts for the 4G63 powered Mitsubishi Eclipse are engineered to offer the absolute best performance possible. Power-Division has designed these cams to take your Supra to the next level and give you the best powerband for whatever type of driving you are doing. With the wide array of profiles Power-Division has a cam combination to fit your needs. From a stock setup to a fully built monster, GSC's Power-Division S-Series cams can add power where you need it.

GSC S1 Cams:
The S1 cams are designed for those running a small 16G or large 16G turbo. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the turbo. Gains of 15-25whp (depending on turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 250-400whp camshaft. Idle is slightly rougher than stock.
Specs:
Duration: 268° / 268°
Peak Lift: 11mm / 10.5mm (intake & exhaust)
RPM Range: 3000-8000
GSC Power Division S1 Cams

GSC S2 Cams:
The S2 cams are designed for those running turbo's 61mm and larger. Gains of 30-65whp (depending on turbo) have been seen by simply bolting the S2 cams in. Designed for a rev range of 4000-9000rpms, upgraded valve springs strongly suggested. 450-800whp camshaft. Idle is rougher than stock.
Specs:
Duration: 274° / 274°
Peak Lift: 11.2mm / 11mm (intake & exhaust)
RPM Range: 4000-9000
GSC Power Division S2 Cams

GSC S3 Cams:
The S3 cams are designed for those running larger turbo's! Designed for a rev range of 4500-9500RPMs, beehive Spring and retainer kit strongly suggested. 600-1000whp camshaft. Idle is much rougher than stock. This is the perfect cam for high horsepower race cars looking to make the most power possible.
Specs:
Duration: 280° / 280°
Peak Lift: 11.7mm
RPM Range: 4500-9500
GSC Power Division S3 Cams

Regardless of power and budget goals, we have the GSC Cams that will meet all of your needs! Please feel free with any questions that you may have.
S&R performance is offline  
Reply Like