I left out that i did replace the rack bushings too...again energy suspension items. Pretty much the only items that have NOT been replaced were the inner tie rods.

Most of us have heard the "assume" saying... I've been there and do realize that experiencing a problem yourself is often the best teacher.

Im certain that after 215k miles that the "ball" in the inner tie rod (not a 240 tie rod but they are pretty common) in the pic below has given up and is what could be causing the handling feel I'm experiencing .




At this point they need replacement for safety sake. One thing is for certain. I didnt go out an by a new rack because of assuming it has got bad. As I said before I really really hope thats not the case.

Thanks for the great feed back so far guys!!