PLEASE READ ENTIRE THREAD!!

1994 ACURA INTEGRA LS
CLEAN TITLE!

Alright so here is the story on this car. I crashed my built teg and bought this 94 Integra LS (auto) to replace it. I got it totally BARE with absolutely nothing, No brake lines, no pedals, no steering column, no gas tank etc. Since then i have slowly been transferring the parts i could from my crashed teg into this one and slowly piece it back together to create a drag shell. I was building it with the intention of only having a dash, one seat, and door panels, with NO: AC, PS, power locks, ABS, SRS, RADIO, literally just a motor and shell.

I have since gotten the car put in the pedals, under dash harness, brake lines, gas tank, etc into the car. I have also replaced the passenger side frame rail from that from my manual crashed teg, as the auto frame rail is totally different from the manual rail where the transmission mounts. The car was converted to NON ABS (no wiring for abs) and converted to RS doors, as they no longer have power locks, but still retain power windows.

What the car will need to get running:

- A SWAP: Engine/Transmission/Harness/Ecu/Axles (obviously)
- Non ABS master cyl, brake booster, 4040 prop valve and front brake lines. (can be found at almost any junk yard or can bend your own.
- You will also need custom fuel lines as stock ones were taken out from under the car and only rear brake lines were left. ( i do have the stock fuel lines for it though!)
- Gauge Cluster

PICS:
























again im looking to get $400 FIRM feel free to shared_pm me with questions or post on here!