I am having problems removing the ONE bolt that appears to go through the bottom of the strut and related bushings through the lower trailing arm. The nut was seriously overtightened I was able to loosen it with a 4 foot breaker bar and a half inch drive 19mm impact socket. The bolt however will NOT come out i have hammered the hell out of it and tried to turn it with a 14mm impact gun @ 125psi. I would like to get these struts out so that I can install the springs if anyone with a shop in the Tampa area can do this (even if it means drilling out the bolt and replacing it) let me know and Ill be there ASAP. John can SpecR do this work?

Thanks
Rich