I got a k20a3 block honed for 86.5mm pistons needs final hone and sonic cleaning... I started out with a blown motor and started to do a killer cam setup and bought prob 3k in parts for the motor all brand new stuff and no longer want to build it anymore...

Top end....

I have type-s cams
8 k20a3 exhaust rockers
vtc sensor
vtc solenoid
prb intake manifold
Rdx 440cc injectors
Hybridracing fuel rail (swagga gold)
Custom budlight valve cover that was powdercoated...

needs throttle body , tps sensor , and valvetrain...

Bottom end

honed to 86.50mm needs final hone and sonic cleaned...
Supertech 12.1:1 pistons
Brian Crower B-beam rods
Acl race bearings
type-s oil pump
type-s crankshaft
type-s oil chains and guides
supertech block gaurd..
all the sensors...
type-s aluminum oil pan..
ep3 5spd tranny with 28k miles.....
alternator with new ktuned pulley
starter
k-tuned a/c p/s delete kit..

pictures can be found here...http://www.k20a.org/forum/showthread.php?t=72957


Looking to trade for a Complete sohc vtec motor with some balls....runs 100% with no problems!!

Mike- 813-454-7127