Originally Posted by
N75T'rex
^^^ Yes there Are Used, cause they dont sit in a shop not doing anything.. They all been to the track an on the streets... They did serve there purpose,
ha ha ha
lembo u fat fuck failure
an ls block was just put together and truely balanced and blueprinted not just shit thrown together because it says standard on parts
a bore gauge micrometer was used and found out the cylinders had allitle taper ... about 0.0013 at the bottom so that was fixed with a good stone hone but across the board there is a 0.0005 variance between the piston to wall from cylinder to cylinder at an 0.006 piston to wall clearance
the crank was hand polished
the rod journals are perfect measured within 0.0002 variance between each rod and main journal and are at the loose end of spec ( the way we like it )
every bearing thickness was mesured and written down an put were it fit best ( were talking less than a tenth of a thousanth difference )
all this was done with a real micrometer , not a caliper
your fat ass doesnt even know what a micrometer looks like
and if anything was out of spec in the least or out of round or just not rite , to the machine shop it goes
and that is blueprinting a motor which we do here at a very good price
and of course all the rings were gapped rite and indexed and all other tolerances were check liked the wrist pins and side to side of rod ends
and blah blah blah ... but all this is a different language to u LUMBO so shut your mouth u worthless peice of shit .... jason and arron are partners now so we are the best honda builders and tuners in town so GO FUCK YOURSELF
and by the way we are talking about my motor in particular , but they all get done like that
when a customer wants a nasty car built look out untill then shut the fuck up Arron and jason have bills to pay and a shop to run ... what do u do kelvin ?? oh u work at taco bell u beaner fuck .... and LUMBO sit back on the couch and open another bag of potato chips or go build a head or motor in a mud puddle on the ground with saw dust and metal shavings and rat shit and then wonder why it only runs for a couple days ... maybe a year top if its bone stock
oh and to the person that came up here and got in arrons shit about some shit said on here your lucky i was'nt around , i would of rocked u in your mouth ...... keep your faget drama away from our place of business