$550 for the mounts $299 for the axles. i didnt price wiring because im having a milspec harness made but wiring normally isnt the cheapest thing. then you figure in cost of the motor and tranny (which HAS to be the k24a2 tranny) and has to use a k24 block. then the cost of a stock rebuild and or built motor if you choose. new clutch and flywheel. if you plan on running a/c and powersteering you have to get an aftermarket traction bar (ESP makes a good one). a custom header will need to be fabbed up because no company makes one for a prelude k swap. then you need kpro (normally you can find one used for $700-900) and a tune.
it adds up really quick lol
_zac