Originally Posted by 500HPLX

I replaced the rubber part with a poly insert on the last 2 cars I did.

I used a 3/8 -1/2" drill bit and drilled a bunch of holes thru the rubber. Then started out near the side of the rubber and let it "run" around the inside of the metal sleeve a few times, it walks the bushing out of the sleeve and the damn things about fall out. You gotta keep control of that drill or it'll brealk your wrist though. Afterward sand the inside of the sleeve with some fairly rough paper and silicone lube the shit out of the new bushing.

Burning them out maks a big ass mess and could get out of hand.

Me no like fire!