Update: Cold side charge complete !

We started from the cooler and worked our way to the throttle body.

First on the list today was to cut/extend a 180deg bend.

tacked



welded



I then had to slightly extend the other side to make it around the core support.



I then rewelded the rest of the original 180deg bend



After that was complete we went ahead and made a spot to weld in our bov



Then we mounted the bov to recheck clearances





Now that we finished the lower portion, it was time to head north. A simple 90deg bend took us in the exact direction we were lookin for !





We finally made it in the bay ! I started to tack together the remaining portion to ensure we would get there precisely ! Looks like we got it lined up to the throttle body pretty good



Since we verified fitment was on, its now time to finish welding !










We wanted to eliminate all possible boost leaks. This car will only have 3 couplers !



Aluminum weld pic



Final BOV placement



Exhaust fab will happen on tues =) stay tuned ............