NSX front caliper brackets - $60 This is a good, working pair of 28T brackets from a 95 Acura Legend GS. These are identical to the ones used on the 91-97 NSX front brakes. Great upgrade for the ITR or base model Legends if you are going to use the thicker discs. If you need these milled to fit a 4x100 setup, PM me. Integra Type-R Master Cylinder 1" - 65$ This is a 1" brake master cylinder from a 2001 Integra type-R. Good for a replacement. This is used for big brake upgrades for EKs. bolts onto any 96-00 civic or 98-01 Integra. 94-01 Integra GSR front calipers with brand new performance pads - SOLD DX/S2000 brake upgrade - $375 This is a for a front brake setup for all 88-00 Civics with the stock 9.5" brakes. Our steering knuckles have the tabs pulled in and don't work with a lot of other setups. However, now there is a great, lightweight option without even needing to change steering knuckles! This setup comes with S2000 calipers, modified brackets, pads, new rotors, and centering rings. It is a bolt on for all 88-00 Civics and all CRXs that have the 9.5" brakes, such as all DX, CX and LX models, CRX HF and Si, 92-93 Civic Si without ABS, and any 88-00 Civic or 90-01 Integra with Civic DX steering knuckles. This setup uses the lightweight S2000 calipers and 11" rotors and clears 15" wheels (and some 14s such as the RacingHart CPF, Volk TE-37 and TE28, Kosei K1s, and others but I don't know which.) 4x100 Integra Type-R front brakes upgrade for Civic EXs and Integras - $310 This is a set of the rare 4x100 front brakes for a Civic and Integra. This is a pair of ITR front calipers with the 23T brackets machined to fit the 4-lug knuckles. This also comes with a new pair of Prelude VTEC rotors. This was made by a former member of h-t. This brake upgrade is a behemoth of an upgrade over stock, using the big ass Type-R calipers with the 57mm pistons. The brackets were precision milled to fit. The rotors were redrilled with a milling machine to 4x100. This bolts onto any 90-01 Integra (exc 96 ITRs), and any 88-05 Civic EX, 99-00 Civic Si. This can fit any other 88-00 Civic if you get Integra or Civic EX knuckles, as their knuckles are different with regard to the caliper mounting point. You will want either a 15/16" or 1" master cylinder if you have a Civic. I have a pair of drilled/slotted rotors too, just ask. GSR Springs - SOLD CL brake upgrade for 9.5" Civic Brakes - $350 This is a brake upgrade for Hondas with 9.5" brakes such as 88-00 Civic DX and LX models, CRXs, 1st Gen Integras and 1st gen CRXs. This is a 11" brake upgrade for DX Civic knuckles. This setup uses Acura CL calipers, precision modification to the brackets to fit, 11" new rotors and hub-centric centering rings made from T6061 aluminum. This is THE best brake setup to clear a 15" diameter wheel. This uses a stronger caliper than the Type-R with a slightly larger pad. The setup comes with calipers, brackets, set of pads, new 11" discs and the centering rings. Its a bolt on to Honda/Acuras with the 9.5" stock brakes (or DA/DC Integras and EX civics with a DX civic knuckle swap.) This has a big piston, so a 15/16" MC at least is recommended. D-series plug wireset – OEM – 5$ Wireset for a D-series. Will work on 96-00 Civics, and most 88-95 Civics that have the spark plugs in front of the valve cover, won’t fit 12 valve D15s. Resistance is around 11k for all 4 of em, which is excellent, they got about 80k miles on em. D-Series alternator - 15$ This is a starter from a 2000 Civic DX coupe. In excellent working shape. D-Series non-VTEC distributor - SOLD 99 Integra GSR rear sway bar + LCAs combo, fits EGs - 50$ This is a rear swaybar, plus bushings, endlinks, d-brackets, subframe brackets (not pictured), and Lower control arms from a 99 Integra GSR. People use this to upgrade 92-95 Civics to take a rear sway bar, as the base models' LCAs dont have the holes for the endlinks. LCAs and sway bar can fit 92-95 civics and of course 94-01 Integras. Bushings are in good shape. offers considered, PM me. Located on the north side of Atlanta. 1999 Honda Civic front licence plate frame and bracket - 10$ This is from a 99 Civic Si. This is the bracket that bolts to the inside of the grille of the bumper so you don't have to scratch the painted surface. Useful if the holes on yours are messed and you live in a state like NY or CA that require front licence plates. Integra RS 4040 prop valve - 30$ This is an Integra RS 40/40 prop valve, used for EGs and EFs when doing a rear disc conversion from drums. Honda S2000 rear calipers/brackets - 55$ This is a pair of rear calipers from an S2000. Theyre from an AP2, not sure of the year, mileage is less than 40k. The top of the calipers have some crap on em in the picture, I assure you thats not rust. They are in good shape and include the brake hoses as pictured. 91 Civic EX Sedan 15/16" master cylinder - 55$ This is a brake master cylinder from a 91 Civic EX sedan. This is a bolt on for 92-95 Civic DX models and all del Sol models. This is used for brake upgrades where you don't have to change the brake booster. 96-98 Civic Cupholder - 15$ This is the cupholder for 96 civics that has the lid. It holds bigger cups than the 99-00 style. Good replacement if yours cracked.