Originally Posted by
Kung.
The ITR/CTR cams have engraved rings at the end,
The Intake cam most likely 94+ GSR since it has the protruding rings with no engraved rings. Im not sure about your exhaust cam though weird it looks like 89-91 b16a exhaust cam if no engraved ring on the end kinda hard to tell from the pic.
all those pics plus some are in the honda-tech thread that i posted but none of them look exactly like the intake cam i have.
Also that picture of the 94+ GSR intake cam is wrong and it that was mentioned in multiple other threads. GSR cams are supposed to look like this:
GSR 96+ spec intake CAM
Which my stock gsr cams do. But im still trying to figure out what these damn unidentified cams are.
Originally Posted by
YARO
I'm 99% sure those are stock gsr cams
I really dont think they are.
in this last picture it shows the difference between a stock gsr cam (bottom) and the unidentified cam (top). u can clearly see the difference in the RIGHT lobe height compared to the center vtec lobe on both cams. Also not to mention the rings are different.
The red arrows show the difference between the right lobe heights compared to the center vtec lobe.