***PRICE DROP***
Throw any offers
Manuel boost controler 15
poly mounts 50--->40
dual oil filter relocation kit for s13-sr20det 40--->35
96 ka starter 40--->30
t25/28 compressor outlet colcking adapter 20--->15
5000 mile 96 ka water pump 20--->10
Vision aftermarket FPR 20--->10
96 ka throttle body and tps 20--->15
1 sr injector 15--->10
chiltons 92+ 240/altima book 10--->8
3x S14 rear sway bar with all hard where and bushings(upgrade that base model) 40
S13 wastegate


96 ka24de
block only
crankshaft (spun rod bearing)
oil pump
96 windsheld washer tank
1-225/40/18 toyo proxi

Falcon fk 452's 2x 225/45/18 60% but has inner camber ware.
Yokohama avs es100 2x 235/40/18 1 60% 1 40% with inner camber ware.
These tires would make good drift tires.
4x 225/55/r17 republic enterprize steel
Make an offer

I got em for $90 about 1.5 years ago off ebay. They lower the engine about 1 inch to lower the center of gravity. I used them for about 1.5 years. They work good. Cant remember the co. name and cant find it. When I pulled my motor and reinstalled it, I over tightened them so the bolts need adjusted. Not a big deal. I only took them out because my greddy oil pan was about 1/4" lower than the crossmember and I didn't like that because I wanted to slam my car. I did bottom out on a driveway but it didn't touch my greddy pan tho. If you dont want the motor lower, you could match up the big washers and that would work good.










Wheel dont spin unless you put a wrench on it.


Starter has 110,000 miles on it.




post shared_pm email text or call 727 623 3274 Bildro@aol.com Bill