Hari, do a boost/vac leak test, if that doesn't solve it, then do a compression test..
i know tom did the work, but what HG did you guys use? (if i know tom, he used a cometic piece of shit HG which ALWAYS have problems, and you need to copper spray the shit out of em)
here's a thing i wrote on another forum about the boost/vac tester..
Originally Posted by
Blackzenki82
and fuck a smoke machine, be like me, go to lowes, get a rubber pipe cap with the ID whatever size you intake/turbo inlet is, and then get a male air hose end by the compressors and shit, drill a 3/8 hole in the clamp, screw the male end in, clamp the motherfucker to your inlet/intake, set your air compressor to 25lbs (or 10PSI more than what you're pushing) and hook it up, let the compressor shut off, and just listen for the hssssssssssss or air leaking... use a cigg (or a black and mild in my case) to help isolate the leak IF you can hear it but not see it...
just a tip.... and the "tester" is under $10 at your local lowes...
if you guys need a hand to help diagnose shit, have Tommy give me a ring, and i'll swing through to help out!
and don't think your top mount is gonna help you beat me brosive!!!