CA Harness wire Colors --------> N60, N62, RB20/25 Maf


Green/Black ----------> PIN B
Black -----------------> PIN C + D
Black/White -----------> PIN E
Green/Yellow ----------> No Connection
****ok this is what i folllowed for wiring. I have already tried two different mafs to make sure thats not the problem. apexi said the ins and outs should be 6 in and 7 out which is totally wrong it wont even run. after searching I found 4 in 7 out. which breaks up bad. the best i have got it to run is with 1 in and 6 out. it runs smooth up to about 5psi by that time you can tell its just not running like it should so i get out of the throttle. will a rom tune for n60 maf fix this? PLEASE ANY INFO IS APPRECIATED. THANKS