F/S S14 FLCAs, RLCA's, Subframe & other stuff!!!!!!!
S14 Subframe - $50
S14 RLCA - 25$
S14 Front sway bar - 30$
S14 Front Calipers - 20$
S14 Rear Calipers - 20$
S14 Passenger side fog light - 20$ (I have driver but it needs work)
S13/14 Stainless Steel N1 Axle back. -50$
Ford Taurus SHO fan - 50$
INFO:
I saved all this stuff off the shell I bought back in November.
Subfame is bare, but IIRC the bushings look to be in decent shape. Its a good swap for you S13 guys.
Ball joints in LCA's are servicable, but I would suggest replacing them eventually. Also a good swap for you S13 people.
If you want to be cool, you can modify the sway bar to make it more stiff by drilling new holes for the endlinks. There are a few right ups about it
SHO fan is serious. Pulls 2500+cfm, its a single blade with 2 speeds. It has its own shroud. It will keep everything super cool.
N1 I think can be used on an S13, since its just an axle back, you will need to go to a shop and have them make a mid pip to extend it to your cat. Its on my car right now and it sounds just fine, not super loud and it dosnt rasp. (on my car, your set up might be differnt)
I have both fog lights, but the driver side is broken, the glass is intact but the projector inside broke so it wobbles around inside. You might be able to salvage it.
I might have some other stuff laying around as well, I'll update it as I go through my collection. DO NOT ASK FOR STUFF, If its not posted then I dont have it.
__________________
Originally Posted by
Epstein
Either way you're required to do it Tampa style. $1500 kit still gets $4.99 rattle can paint job. Bonus points if you use 2 different colors of gray.
Last edited by longfellow2; Jun 8, 2009 at 06:13 AM.